Building Foundation Tips

 
Home
Article List
Books
Pictures
Videos
 
Framing Plate Anchors
Simpson Strong Tie UFP10-SDS3 6-3/4
  The UFP provides a retrofit method to anchor the mudsill to the side of the foundation in applications where minimum vertical clearance exists.
Simpson Strong Tie MAS 2 x 4 or 2 x 6 Mudsill Anchor
  Mudsill anchor provide an alternative to anchor bolts. They easily mount on forms and make finishing easier. The unique design provides installation flexibility, eliminating problems with misplaced anchor bolts.
Simpson Strong Tie #MASZ MASZ Mudsill Anchor
  Mudsill anchor provide an alternative to anchor bolts.
Simpson Strong Tie MA6 2 x 6 or 3 x 6 Mudsill Anchor
  Suitable for stem wall or slab foundations, mudsill anchors are one piece so there are no more nuts and washers to lose.
Simpson Strong Tie FSA 12 Gauge Foundation Stud Anchor
  FSA Foundation Stud Anchor nails or bolts to floor joists, or nails to the stud. Plywood sheathing may require notching with stud-to-foundation installation.
Simpson Strong Tie FAP 9
  The FAP Plate connects the mudsill to the foundation, and is designed to provide lateral load resistance.
MAB15 Mudsill Anchor
  Check load tables to see if you can use this type of framing plate anchoring system for your specific application.
Simpson Strong Tie THD62612H 5/8
  It is designed for optimum performance in both cracked and uncracked concrete; a requirement that the 2006 IBC places on post-installed anchors.
Simpson Strong Tie N10D5HDG 10d x 1-1/2
  Simpson Strong-Tie nails and structural fasteners have been developed as the optimum fasteners for connector products.

 
 

Back To Building Foundation Hardware

 

Building Stairs Building Pictures Home Remodeling Home Inspections Roof Framing
 

Copyright © 2007 -2009 Greg Vanden Berge All Rights Reserved